Specification - LG 55LE7500 Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to the LCD TV used LD03E
chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature: 25 ºC ± 5 ºC(77 ºF ± 9 ºF), CST: 40 ºC ± 5 ºC
2) Relative Humidity : 65 % ± 10 %
3) Power Voltage
: Standard input voltage (AC 100-240 V~ 50 / 60 Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
4. Module General Specification
No. Item
1 Display Screen Device
2 Aspect Ratio
3 LCD Module
4 Operating Environment Temp. : 0 deg ~ 50 deg
5 Storage Environment
6 Input Voltage
7 Power Consumption
8 Module Size
8 Pixel Pitch
9 Back Light
10 Display Colors
11 Coating
Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

SPECIFICATION

Specification
139 cm(55 inch) wide color display module
16:9
139 cm(55 inch) TFT LCD FHD
Humidity : 20 % ~ 90 %
Temp. : -20 deg ~ 60 deg
Humidity : 10 ~ 90 %
AC 100-240V~, 50 / 60Hz
Power on (White)
LGD Typ : 145
1261.6(H) x 732.4(V) x 24.2 mm(D)
0.63 (H) x 0.63 (V)
LED(EDGE), LGE(IOP)
1.06 B(true) colors
3H
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety : CE, IEC specification
- EMC :CE, IEC
LCD
LGD/ IOP
LCD (Module) + Backlight(EDGE LED)
Without inverter
- 4 -
Remark
LGE Internal Use Only