Controllers Menu - E-Mu Vintage Keys Operation Manual

Controllers Menu

The Controllers menu contains functions related to the keyboard, knobs or
trigger buttons of Vintage Keys. For example, the Command Function
Trigger Keys are programmed in this menu. All Controllers menu data is
saved with the Multisetup. See page 41 for more information about Multi-
setups.
To enable the Controllers menu:
Press the Controllers button, lighting the LED. The Controllers Menu
screen displays the menu page most recently selected since powering up
Vintage Keys. The cursor appears below the first character of the screen
heading on line one.
To select a new screen:
Press the Home/Enter button or press the Cursor button repeatedly until
the cursor is below the screen title heading. Rotate the data entry control to
select another screen.
To modify a parameter:
Press either Cursor button repeatedly (or hold down the right cursor button
while turning the data entry control) until the cursor is below the desired
parameter value. Rotate the data entry control to change the value.
To return to the previously selected Mode/View screen:
Press the Controllers button, turning off the LED.
Vintage Keys Operation Manual 71