Rename Flash Simm - E-Mu Vintage Keys Operation Manual

Rename Flash SIMM

   
The Flash ID is the MSB
of the MIDI Bank Select
command used to select the
Sound Bank.
_ _ _ _
If there is no Flash SIMM
in the unit, the error message,
"Requires Flash SIMM" will be
displayed.
This utility allows you to rename the Flash SIMM and change its ID
number. Flash SIMMs can have any five letter name you choose. Each Flash
SIMM in a Vintage Keys unit must have a unique ID number (106-119).
The field in the upper right corner selects between multiple Flash SIMMs. If
only one Flash SIMM is installed, the field cannot be modified.
RENAME FLASH SIMM
New Name: Drums
Make sure a Flash SIMM is inserted in a Vintage Keys SIMM socket.
1.
Press the Save/Copy menu button.
2.
Rotate the data entry control to select the "Rename Flash SIMM"
3.
function shown above.
Move the cursor to the "New Name" field and rename the SIMM using
4.
the data entry control to select the letter and the cursor keys to select
the position.
Set the Sound ID number for the SIMM. It doesn't matter which
5.
number you choose as long as the same number isn't used in another
SIMM.
Press Enter. The following screen appears and the Enter LED will be
6.
flashing.
Press ENTER to Update
Flash SIMM data
Press Enter again to confirm or any other button to abort. The
7.
following screen appears:
CHANGING SIMM NAME & ID
(takes about 2 minutes)
The Flash presets cannot be used until Vintage Keys is rebooted (power
8.
off then on). Reboot the Vintage Keys and verify that the new Flash
bank has been properly renamed.
Save/Copy Menu
Rename Flash SIMM
Flash
ID: 110
Vintage Keys Operation Manual 193