Performance Setup - E-Mu Vintage Keys Operation Manual

Setup

Performance Setup

Performance Setup
Additional
MIDI
Devices
MIDI In
MIDI
Computer
Interface
Out
Out In
Rear Panel
MIDI
SWITCH PEDAL
R SUB 1 L R MAIN L
IN OUT
THRU
OUTPUTS
FOOT
Mixer
Footswitch
Foot Pedal
Amp
MIDI In/MIDI Out
Vintage Keys can be connected to a computer/sequencer via the MIDI In
and MIDI Out ports. Vintage Keys to playback complex multitimbral
sequences.
FootPedal Wiring
Audio Outputs
Ground Tip
Two pairs of programmable stereo outputs (Main and Sub 1) are provided.
The internal effects are available only on the Main outputs. Specific presets
(or MIDI channels) can be routed to one of these stereo pairs in order to be
Ring
processed further or mixed separately.
Tip
Footswitch & Footpedal
The footswitch input accepts either a normally-open or normally-closed
Ring
momentary footswitch. The footpedal input can sense either 0-5 volts on
the ring of a stereo jack or a pedal with the potentiometer wired as shown
at left. The footswitch and Pedal inputs are programmable in the
Controllers, Footswitch menu and the Preset Edit, PatchCord menu.
Ground
Vintage Keys Operation Manual 15