Multisetups; Restoring Multisetups - E-Mu Vintage Keys Operation Manual

Multisetups

O O O O
Vintage Keys always
defaults to Multisetup 00 on
power up.
Restoring
Multisetups
A Multisetup is a group of parameters that you might associate with a
particular performance setup or song. It is like a "snapshot" of the current
configuration of the Vintage Keys. There are 64 setups numbered 0-63. All
the Multisetups are user programmable except 63, the factory setup.
A Multisetup includes ALL the following parameters:
• Preset/Volume/Pan/Arp assignments for each of the 16 MIDI channels.
• Multisetup Name
• ALL Controllers menu parameters
• ALL Global Menu parameters, except...
User Key Tuning Tables
• ALL Arp Menu parameters, except...
User Arp Patterns
• ALL MIDI Menu parameters, except...
MIDI Program Change->Preset Map
When a Multisetup is selected, it overwrites the current Preset/Vol/Pan/Arp
selections on all MIDI channels. It also overwrites the Controllers, Global,
Arp, and MIDI menu parameters (with the exceptions noted above).
If you make changes to any of these menus, Vintage Keys will retain the
changes, even if power is turned off. They are of course, overwritten when
you restore a Multisetup.
Vintage Keys contains 64 Multisetup locations. These are all User locations
except location 63, which is a factory defined Multisetup.
Multisetups can be restored using a MIDI Bank Select command.
Select: cc00 = 80, cc32 = 00, (dec) then send a Program Change command
corresponding to the Multisetup you wish to select.
RESTORE MULTISETUP
003 Jazzercide
To Restore (Select) a Multisetup:
Press the front panel Multisetup button (below the Data Entry Control).
1.
Scroll to the Restore Multisetup screen using the data entry control. The
2.
menu page most recently selected since powering up Vintage Keys will
be displayed. The cursor appears below the first character of the screen
heading on line one.
Basic Operations
Multisetups
Vintage Keys Operation Manual 41