Assembling Fence To Unifence Body - Delta Unifence 36-905 Manual

4 . Lock fence body (A) to the guide rail by pushing
down on handle (B) as shown in Fig. 46.
ASSEMBLING FENCE
TO UNIFENCE BODY
1 . The fence (A) can be assembled to clamp plate (B)
in either the horizontal position as shown in Fig. 47, or
the vertical position as shown in Fig. 48. Make certain the
two lock knobs (C), are loose and slide fence (A) onto
clamp plate (B) as shown. Then tighten the two lock
knobs (C).
2 . For most normal ripping operations, the bottom of
the fence should be positioned slightly above the table
surface. Loosen two lock knobs (C) Fig. 49, and place a
thin object such as a ruler (D) between the table and
fence, as shown. Then tighten two lock knobs (C).
A
A
B
D
14
B
Fig. 46
Fig. 47
C
Fig. 48
C
Fig. 49