When And How To Bypass Your Water Conditioner - Culligan Gold Series Owner's Manual

42

When and How to Bypass Your Water Conditioner

Normally, all water except outside lines passes through the water conditioner. There are times when
the water conditioner should be bypassed, using the Cul-Flo-Valv
You should bypass:
1. If lines to outside faucets do not bypass the water conditioner, and you do not want to waste soft
water on lawn sprinkling or other outside uses.
2. If you are going away on vacation and want to save salt by not having the unit recharge while
you're away.
Bypass Valve
In the back of Culligan water conditioners is a push-button Cul-Flo-Valv
simply turn the blue knob clockwise. To return to soft water service, reverse the procedure - turn the
blue knob counter-clockwise.
To BYPASS, turn the blue knob clockwise (see directional
arrow on end of knob) until the knob stops as shown.
DO NOT OVERTIGHTEN!
To return to SERVICE, turn the blue knob counter-clockwise (see directional arrow on end of knob)
until the knob stops as shown.
DO NOT OVERTIGHTEN!
Bypass, or a 3-way bypass valve.
®
Bypassed – Figure 14a
About 1-1/4"
Soft Water – Figure 14b
Bypass. To bypass unit,
®
A screwdriver shank
may be used in the slot
(arrow) as a lever for
extra turning force if
needed