Advertisement
Data sheet | HP NonStop G16SE
Specifications
Form factor
Weight
Dimensions (Inches: H x W x D)
Number of power plugs
Power supply plug type
Maximum watts RMS
NonStop system supported
NonStop OS versions
Compliance with IEEE standards
Ethernet ports cabling requirements
Connectors
8U (two 4U modules)
136 lb (61.7 kg)
13.8 x 19 x 29.37
4
IEC 320 C14
652
HP Integrity NonStop BladeSystem NB54000c and HP Integrity BladeSystem NB56000c
Release RVU is J06.15
Minimum RVU is J06.14 with required SPRs
10 megabits per second Ethernet: IEEE 802.3—10BASE-T CSMA/CD (Ethernet)
10/100 megabits per second Fast Ethernet: IEEE 802.3u—100BASE-TX Fast Ethernet with
auto-negotiation of speed
1000 megabits per second Gigabit Ethernet: IEEE 802.3ab—1000BASE-T Gigabit Ethernet and
IEEE 802.3z—1000BASE-SX
IEEE 802.3x—Flow control in full-duplex Ethernet LANs
1000 megabits per second Gigabit Ethernet
The procurement of cables is a customer responsibility. The G16SE uses the following standard cables that
can be purchased from third-party vendors:
• CAT 5, CAT 5e, or CAT 6 UTP (4 pairs)
• 850 nm 50/125 μm multimode fiber
Standard RJ-45 pin-out connector
Standard LC duplex connector
3
Advertisement
