Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BK Radio DPH
Summary of Contents for BK Radio DPH
- Page 1 DIGITAL PORTABLE RADIO Owner’s Manual BK Radio 7100 Technology Drive West Melbourne, FL 32904 Telephone: (321) 984-1414 FAX: (321) 984-0434 www.relm.com © Copyright 2004 RELM Wireless Corporation. All rights reserved. REV 903 P/N 7001-30958-100 03-04...
-
Page 2: Table Of Contents
Other Operational Features..............31 SERVICE Alphanumeric Display ................. 34 If you need service, contact your local BK Radio dealer equipped to Cloning Procedure ................36 service your radio. If you find it impractical to have service performed by your local dealer, contact BK Radio at the address below: Battery Installation And Removal ............ -
Page 3: Introduction
CONGRATULATIONS, you now own a BK Radio DPH APCO Project 25 digital radio. To meet backwards compatibility as defined by the APCO Project 25 standard, the DPH digital portable radio provides users the ability to interoperate with narrow or wide band analog channels as well as digital systems. -
Page 4: Rf Energy Exposure Awareness And Control Information
Talkback is and how to control your exposure to assure compliance with established RF Scan Mode. exposure limits. TGID Talk Group ID http://www.fcc.gov/oet/rfsafety/rf-faqs.html Time-Out-Timer A feature that limits the duration of calls. http://www.osha.gov/SLTC/radiofrequencyradiation/index.html Transmit BK Radio DPH Owner’s Manual... - Page 5 Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. BK Radio battery packs are available in a variety of sizes and types for Your BK Radio 2-way radio has a RF exposure product label. Also, your BK special applications.
- Page 6 Antenna should be kept away from eyes. [FCN]. ID number 125 is now stored in the When worn on the body, always place the radio in a BK Radio • permanent memory of the clone.
-
Page 7: Radio Controls
The program in the master will OFF- 9 10 HI/LO then be downloaded to the clone. CHANNEL DIGITAL TRANSMIT SELECT DPH RADIO WITH DPH RADIO WITH POWER KEYPAD/DISPLAY KEYBOARD/DISPLAY COVERED OR COVERED 11. I F THE DOWNLOAD WAS SUCCESSFUL... -
Page 8: Basic Operation
BASIC OPERATION CLONING PROCEDURE RECEIVE Any “master” radio (a DPH with the desired radio frequencies and 1. T by turning the Volume URN POWER ON knob clockwise. A beep sounds, indicating settings) is capable of transferring its program to another DPH or the radio is operational. -
Page 9: Channel Guard Operation
DISPLAY BACKLIGHTING CHANNEL GUARD OPERATION The DPH radios can be programmed by your Channel Guard allows one radio or group of radios to be selectively dealer to backlight the display when a signal is called within a system. On digital channels, if the channel’s Squelch received or when a key is pressed. -
Page 10: Mixed Mode Operation
Press PTT DPH Series portable radios are built with the ‘TX Digital’ soft switch. As in Talkback During Hold Time alphanumeric displays that can be programmed... -
Page 11: Channel Groups
Squelch knob off the Channel Guard detent. the group you are operating in. The transmitter is locked out only if the Squelch knob is set to the Channel Guard detent. BK Radio DPH Owner’s Manual... - Page 12 During Scan and Priority Scan operation, the switch position, pressing [#] will only Busy Channel Indicator glows when activity is display the knob-selected value. New detected on any channel on the Scan List. entries will not be accepted. BK Radio DPH Owner’s Manual...
-
Page 13: Programmable Top Switches/ Function Menu
PROGRAMMABLE TOP SWITCHES/ OTHER OPERATIONAL FEATURES FUNCTION MENU The BK Radio D Series is based on a microprocessor core that allows extra features and operational characteristics to be programmed into the radio. Your dealer can help define the best operational settings for The following functions can be assigned to the your system and program them into the radio. -
Page 14: Scan Operation
Once the signal ends, the radio continues to RX SCN selected Channel Guard values are used LABEL monitor the channel for the preset scan delay by the transmitter in Scan Mode. time before it resumes scanning. BK Radio DPH Owner’s Manual... - Page 15 2. P RESS AND HOLD THE SWITCH talk in a normal voice. When the PTT switch is released, the radio continues to monitor the selected channel for the preset scan delay time before it resumes scanning. BK Radio DPH Owner’s Manual...
- Page 16 Press [ENT] to store the new ID. Select a that group is not on the Group Scan List. new ID to be programmed, or press and hold [ENT] to exit Programming Mode (the PRG annunciator will be extinguished). BK Radio DPH Owner’s Manual...
-
Page 17: Priority Scan
ID Programming Mode contains the proper Channel Guard value, the is exited. radio receives the message. Otherwise, the radio will re-check the channel every 4 seconds, until the activity on the channel ceases. BK Radio DPH Owner’s Manual... - Page 18 Transmit Channel display will return to the normal operating mode display, but the phone icon will flash Missed Call until the [*] key is pressed, putting the radio in Unit-To-Unit Mode, displaying the last active BK Radio DPH Owner’s Manual...
- Page 19 Priority Mode B transmissions before placing a Unit-To-Unit call. If the RTX channel is programmed for Mixed Mode transmit, transmissions will be Priority Mode C made as digital Unit-To-Unit calls while the radio is in Unit-To-Unit Mode. BK Radio DPH Owner’s Manual...
-
Page 20: Unit-To-Unit Call
Channel Selector knob to the priority along with phone icon. Not on Call List channel, and then transmit. Otherwise, the numeric ID will be displayed along with the RX, ID, and phone icon. BK Radio DPH Owner’s Manual... - Page 21 Scan List. BK Radio DPH Owner’s Manual...
Need help?
Do you have a question about the DPH and is the answer not in the manual?
Questions and answers