Network Settings - Amped Wireless AP20000G User Manual

High power wireless-n 600mw gigabit dual band access point

Hide thumbs Also See for AP20000G:

Table of Contents

AP20000G

USER'S GUIDE

NETWORK SETTINGS

IP Address: The IP address of the Access Point.

Subnet Mask: The subnet of the Access Point.

Default Gateway: The access point to another network,

normally your router.

DHCP: The Access Point includes a feature to help manage

the IP addresses within your network automatically. When

connected to a network, the Access Point will obtain an IP

address from your router and act as a DHCP Client.

However, when there is no connection available, the

Access Point will act as a DHCP Server. You may also

manually control the IP settings of the Access Point by

choosing Client, Server or Disabled / Static IP from the

DHCP drop down menu. This is only for advanced users.

Note:

If you choose to use a Static IP address for the Access Point, you will no longer be able to access the web

menu using http://setup.ampedwireless.com. You must use the assigned IP address to acces the web menu.

Table of Contents