Table of Contents
Advertisement
Section 11: SCPI Tables
SCPI command subsystems reference tables
Tables 11-1 to 11-7 summarize the commands for each SCPI subsystem. The following list
includes the table numbers and page numbers for each SCPI subsystem command summary.
Table 11-1 DISPlay command summary........................................................ 11-3
Table 11-2 FORMat command summary ....................................................... 11-4
Table 11-3 OUTPut command summary........................................................ 11-5
Table 11-4 SENSe command summary......................................................... 11-6
Table 11-5 SOURce command summary .................................................... 11-13
Table 11-6 STATus command summary ...................................................... 11-14
Table 11-7 SYSTem command summary..................................................... 11-15
General notes
•
Brackets ([ ]) are used to denote optional character sets. These optional characters do not
have to be included in the program message. Do not use brackets in the program message.
•
Angle brackets (<>) are used to indicate parameter type. Do not use angle brackets in the
program message.
•
SCPI - A checkmark (✓) indicates that the command and its parameters are SCPI
confirmed. An unmarked command indicates that it is a SCPI command but does not
conform to the SCPI standard set of commands. It is not a recognized command by the
SCPI consortium. SCPI confirmed commands that use one or more non-SCPI parameters
are explained by notes.
•
Refer to
•
Refer to
•
Refer to each table above for specific command information.
11-2
Model 2308 Portable Device Battery/Charger Simulator User's Manual
Section 6
for GPIB operation.
Section 8
for common commands.
Return to
Section Topics
2308-900-01 Rev. A / July 2008
Advertisement
Table of Contents
