Advertisement
Press FM/AM on the remote control until FM or AM (MW) appears in the display window. 2. And then every time you press FM/AM, FM and AM (MW)
- b or TUN.+ B on the remote control for about three seconds until the frequency indication starts to change, then release. Scanning stops when the Recorder
Receiver tunes in a station. "ST" (for stereo program) appear in the display window. Listening to the Radio Preset radio stations in the 's memory first (see
1. Press FM/AM until AM (MW) or FM appears in the display window. The last received station is tuned in. 2. Press PR/PRESET + or PR/PRESET -
repeatedly on the remote control to select the preset station you want. Each time you press this button, the Recorder Receiver tunes in one preset station at a
time. 3. Adjust the volume by rotating VOLUME on the front panel or by pressing VOLUME + or - on the remote control repeatedly. To turn off the radio
Press POWER to turn the Recorder Receiver off or select another function mode (DVD, AV 1, AV 2 etc.,).
4. Press ENTER on the remote control. A preset number will flash in the display window. 5. Press PR/PRESET + or PR/PRESET - on the remote control to
select the preset number you want. 6. Press ENTER on the remote control. The station is stored. To listen to non-preset radio stations Use manual or
- b or TUN.+ B on the remote control repeatedly. For automatic tuning, press and hold TUN.- b or TUN.+ B on the remote control for about three seconds on
7. Repeat steps 3 to 6 to store other stations. To tune in a station with a weak signal Press TUN.- b or TUN.+ B repeatedly in step 3 to tune in the station
For your reference To clear all the stored stations Press and hold ENTER for about five seconds to clear all the stored stations. If an FM program is noisy
Press MO./ST. on the remote control so that "ST" dis-appears in the display window. There will be no stereo effect, but the reception will improve. Press this
button again to restore the stereo effect. To improve reception Reorient the supplied antennas. 64 RDS Operation This unit is equipped with RDS (Radio Data
System), which brings a wide range of information to FM radio. Now in use in many countries, RDS is a system for transmitting station call signs or network
information, a description of station programme type text message about the station or specifics of musical selection and the correct time. Programme Search
(PTY) A major benefit of RDS is its ability to encode broadcasts with Programme Type (PTY) codes that indicate the type of material being broadcast.
The following list shows the abbreviations used to indicate each PTY along with an explanation of the PTY. NEWS AFFAIRS INFO SPORT EDUCATE
DRAMA CULTURE SCIENCE VARIED POP M ROCK M EASY M LIGHT M CLASSICS OTHER M WEATHER FINANCE CHILDREN SOCIAL RELIGION
PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENT TEST ALARM 1 News Current Affairs Information Sports
Educational Drama Culture Science Varied Speech Programme Popular Music Rock Music Easy Listening Music Classical Music Serious Classical Music
Other Music Weather Information Financial Programmes Children's Programmes Social Affairs Programmes Religious Broadcasts Phone-In Programmes
Travel and Touring Leisure and Hobby Jazz Music Country Music National Music Oldies Music Folk Music Documentary Programmes Station Alarm Test
Message Emergency Broadcast Information RDS Tuning When a FM station is tuned in and it contains RDS data, the unit will automatically display the
station's call sign and the RDS indicator will light in the Display Window as well as indicators for the RDS services programme (PS), programme type
recognition (PTY), Radiotext (RT) and Clock Time (CT) if transmitted by the station. RDS Display Options The RDS system is capable of transmitting a wide
variety of information in addition to the initial call sign that appears when a station is first tuned.
Before tuning, make sure that you have turned down the volume. 1.
changes alternately. 3. Press and hold TUN.
"Presetting radio stations" on the left).
automatic tuning in step 2. For manual tuning, press TUN.
the remote control.
manually.
Advertisement
