Advertisement
The number of the current angle appears on the TV screen. Tip: The ANGLE indicator will blink on the TV screen at scenes recorded at different angles to
indicate that angle switching is possible. Changing the Audio Soundtrack DVD Press AUDIO then press b / B repeatedly during playback to hear a different
audio language or audio soundtrack if available. Changing the Audio Channel HDD -RWVR -RWVideo +RW -R +R VCD DivX Press AUDIO then press b / B
repeatedly during playback to hear a different audio channel (STEREO, LEFT or RIGHT).
With DVD-RW discs recorded in VR mode and HDD that have both a main and a Bilingual audio channel, you can switch among Main (L), Sub (R), or
Main+sub (L+R) by pressing AUDIO. Checking the Contents of DVD Video Discs: Menus DVDs may contain menus that allow you to access special
features. To open the disc menu, press MENU/LIST. Then, press the appropriate number button to select an option. Or, use the b / B / v / V buttons to
highlight your selection, then press ENTER. Title Menu DVD 1. Press TITLE. If the current title has a menu, the menu will appear on the TV screen.
The menu may contain camera angles, spoken language and subtitle options, and chapters for the title. 34 Subtitles DVD DivX Press SUBTITLE then press b /
B repeatedly during playback to see the different subtitle languages. Last Condition Memory DVD This recorder memorizes the user settings for the last disc
that you have viewed. Settings remain in memory even if you remove the disc from the recorder or switch off the recorder. If you load a disc that had its
settings memorized, the latest stop position is automatically recalled. Notes: Settings are stored in memory for use any time. This recorder does not memorize
settings of a disc if you switch off the recorder before commencing to play it. Instant Skip HDD -RWVR -RWVideo +RW -R +R DVD Each press INSTANT
SKIP skips forward 15 seconds. In HDD playback or Timeshift mode, each press b / B skips forward or reverse 5 minutes. Note: If appears, the feature is not
Finding Locations on a Disc VCD You can directly access any point on a video CD using this function. Use this function only while a video CD is playing.
The progress bar appears on the TV screen. 2. Use b / B to find a start position for playback. 3. Press ENTER to confirm the selected position.
Playback starts from the selected position. Note: This function works only when no marker is memorized. PIP (Picture in Picture) HDD -RWVideo +RW -R
+R -RWVR VCD DVD On and off Press PIP to switch on the sub picture, press this button again to switch it off. Input mode selection for sub picture Press
AV to select the input mode for the sub picture. Each time this button is pressed, each input mode for the sub picture is displayed as shown below. Tuner AV1
AV2 OPT AV3 AV4 Program selection for sub picture Use v / V to change the program when sub picture's input is set to tuner. The selected program number
is displayed on the TV screen. You can view the selected program by pressing STOP (x). Sub picture position change Press b / B repeatedly until desired
Zoom Sub picture Press ZOOM repeatedly to enlarge the sub picture, the magnification level increases up to three steps. 35 Playback This function enables
you to view the stored stations in sub picture during playback. Playing a DivX Movie File The recorder can play Divx files on HDD, CD-R/RW or
DVD±R/RW discs. Before playing DivX files, read "About DivX movie files" on page 37. 1. Press HOME. 2. Select a media that contains DivX file(s) then
The Movie menu appears on the TV screen. 2. Press SETUP. The Setup menu appears. Press SETUP b [LANGUAGE] b [Disc Subtitle] then select the
Otherwise, the disc menu may not appear. 2.
available on the disc.
Playback jumps to the point specified. 1. Press SEARCH during playback.
position is achieved. The sub picture moves clockwise or counterclockwise.
press ENTER. 3. Select [MOVIE] option then press ENTER.
language you have found.
Refer to "Disc Menu/Audio/Subtitle" on page 26.
Advertisement
