Advertisement
Some discs offer more suitable scenes as an alternative. Ratings are area dependent. The parental control feature allows you to block access to scenes below
the rating you input, thereby preventing your children from being able to view material you believe is unsuitable. Set Password 1. Select [Set Password]
option then press B. 2. Follow step 2 as shown "Rating". To change the password, select the [Change], press ENTER and input the new 4-digit code then
Input it again to verify. To delete the password, select [Delete] then press ENTER. If you forget your 4-digit code If you forget your password, to clear the
current password, follow the procedure below. 1. Press SETUP to display the Setup menu.
2. Use the Number buttons to enter the 6-digit number "210499". 3. Select [Yes] then press ENTER. The 4-digit password is cleared.
Enter a new code. 1. Select [Rating] option then press B. 2. To access the Rating, Password and Area Code features, you must input the 4-digit security code
you created. If you have not yet entered a security code you are prompted to do so. Input a 4-digit code and press ENTER. Enter it again and press ENTER to
Select a rating using the v / V buttons. [1] - [8]: Rating one (1) has the most restrictions and rating eight (8) is the least restrictive. [No Limit]: If you select
[No Limit], parental control is not active and the disc plays in full. 4. Press ENTER to confirm your rating selection, then press SETUP to exit the menu. Note:
If you set a rating for the recorder, all disc scenes with the same rating or lower are played. Higher rated scenes are not played unless an alternate scene is
available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback stops. You must enter the 4-digit
Area Code Enter the code of an area whose standards were used to rate the DVD video disc, referring to the list (See "Area Codes", page 63.). P T 1. Select
Follow step 2 as shown "Rating". 3. Select the first character using the v / V buttons. 4. Shift the cursor using B buttons and select the second character using
5. Press ENTER to confirm your area code selection, then press SETUP to exit the menu. 27 Hookup and Settings DivX Registration Code DivX Recording
Settings Record Mode Set You can set the picture quality for recording; HQ (High Quality), SQ (Standard Quality), LQ (Low Quality), EQ (Extend Quality).
We provide you the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more
2. Press ENTER while [View] is selected and the registration code will appear. 1. Select [Rec Mode Set] option then press B. 2. Use v / V to select a desired
Record Mode (HQ, SQ, LQ or EQ). 3. Press ENTER to confirm your selection, then press SETUP to exit the menu. 3. Use the registration code to purchase or
divx.com/vod. Follow the instructions and download the video onto a disc for playback on this unit. Note: All the downloaded videos from DivX® VOD can
only be played back on this unit. Record Aspect When DVD recording, you can set the recording aspect ratio to suit the material you're recording (16:9 or
Note: You can use this function when your TV is equipped with 16:9. 28 DV Recording Audio You need to set this if you have a camcorder using 32kHz/12-bit
sound connected to the front panel DV IN jack. Some digital camcorders have two stereo tracks for audio. One is recorded at the time of shooting; the other is
for overdubbing after shooting. On the Audio 1 setting, the sound that was recorded while shooting is used.
On the Audio 2 setting, the overdubbed sound is used. Disc Settings Disc Format If you load a completely blank disc, the recorder will initialize the disc.
press ENTER.
verify. If you make a mistake before pressing ENTER, press CLEAR. 3.
password or change the rating level in order to play the disc.
[Area Code] option then press B. 2.
information, visit www.divx.com/vod. 1. Select [DivX Reg. Code] option then press B.
rent the videos from Divx® VOD service at www.
v / V buttons.
4:3).
Advertisement
