Electromagnetic Fields (Emf); Charging - Philips TT3000 User Manual

English
12

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions in this user
manual, the appliance is safe to use based on scientific evidence available today.

Charging

Fully charge the batteries before you use the appliance for the first time
and when the batteries are empty. Fully charging the batteries takes up to 1
hour and 40 minutes.
Charge the appliance when the charging light lights up orange during use to
indicate that the battery is low. When this happens, the remaining capacity
is at least 30 flashes.
Fully charged batteries provide at least 320 flashes at light intensity 5.
Fully charge the appliance every 3 to 4 months, even if you do not use the
appliance for a longer time.
Charge the appliance in the following way:
1 Switch off the appliance.
2 Insert the small plug into the appliance and put the adapter in the
wall socket.
The charging light flashes green to indicate that the appliance is charging.
,
When the batteries are fully charged, the charging light
,
lights up green continuously.
Notes:
- The adapter feels warm during charging. This is normal.
- You cannot use the appliance during charging.
- This appliance is equipped with battery overheat protection and does
not charge if the room temperature exceeds 40°C.
Never cover the appliance and adapter during charging.
3 After charging, remove the adapter from the wall socket and pull the
small plug out of the appliance.