System Configuration
USB Configuration
Miscellaneous
Devices
Video
Primary Video
Security
Strong Password
Password
Configuration
58
This field configures the integrated USB controller. You can set
the USB Controller to :
•
Enable USB Controller
•
Disable USB Mass Storage Dev
•
Disable USB Controller
This field lets you enable or disable the following on-board
devices.
•
Enable front USB
•
Enable Rear Quad USB
•
Enable Rear Dual USB
•
Enable PCI Slot
This field determines which video controller will become the
primary video controller when 2 controllers are available in the
system. This selection matters only if there are 2 video
controllers present.
•
Auto(default) - Use the add-in video controller.
•
Onboard/PEG - Use the integrated video controller unless a
Graphic card is installed. A PCI Express Graphic (PEG) card
will override and disable the integrated video controller.
This field enforces strong passwords. If enabled, all passwords
must contain at least one uppercase character, one lowercase
character, and be at least 8 characters long. Enabling this
feature automatically changes the default minimum password
length to 8 characters.
Enforce strong password - This option is disabled by default.
These fields control the minimum and maximum number of
characters allowed for Admin and System passwords. Changes
to these fields are not active until they are committed via the
apply button or saving changes before exiting setup.
•
Admin Password Min