Dvd Player - Fujitsu P-SU4H30E User Manual

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)

DVD PLAYER

• Connect the video signal cable to either the component video terminal or the SCART terminal.
• If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video
terminal.
To component video
output
AMPLIFIER
• Connect the audio signal cable to either the digital output or the analog audio output.
* The signal input as digital input is not output as analog audio.
* The digital audio input terminal on the display complies with a sampling frequency of 48 kHz.
In the case of outputs with another frequency, connect to an audio system (amplifier)*.
To analog audio input
E-20
To audio outputs
To SCART output
To SCART input
VIDEO1
SCART
PICTURE
VIDEO5
INPUT
COMPONENT VIDEO
Y P B /C
To component
video input
To digital audio input
VIDEO1
SCART
PICTURE
VIDEO5
INPUT
COMPONENT VIDEO
Y P /C P /C
B B R R
To audio inputs
VIDEO5 VIDEO6 RGB1 RGB2
AUDIO
INPUT
DIGITAL1 DIGITAL2
VIDEO2
SCART SCART
VIDEO1
COMPONENT VIDEO
mD-sub
B P R /C R Y P B /C B P R /C R
RGB1
DVI
DISPLAY OUTPUT
Rear side of selector
To analog audio output
VIDEO5 VIDEO6 RGB1 RGB2
AUDIO
INPUT
DIGITAL1 DIGITAL2
VIDEO2 VIDEO4
SCART SCART
VIDEO1 RGB2
COMPONENT VIDEO mD-sub
Y P /C P /C
B B R R
RGB1
DVI
DISPLAY OUTPUT
Rear side of selector
AUDIO
OUTPUT
DIGITAL
VIDEO4
RGB2
PICTURE AUDIO
To digital audio output
AUDIO
OUTPUT
DIGITAL
PICTURE AUDIO