Fujitsu P-SU4H30E User Manual page 10

PART NAMES AND FUNCTIONS (Continued)
SELECTOR SECTION – REAR
PICTURE
INPUT
1 Audio input terminals
Input audio through the terminals corresponding to the used video input terminals.
* The digital input terminals can be matched as desired with the remote control. (See P. E-27.)
2 Audio output terminals
For use when the audio from an audio system (amplifier) is used.
3 Video1 input terminal
4 Video2 input terminal
5 Video4 input terminal
Connect this terminal to the SCART terminal of your VCR or DVD, etc.
* See "SETTING THE INPUT TERMINALS" on P. E-41.
6 Video5 input terminal
7 Video6 input terminal
Connect this terminal to the component video output terminal of your DVD, etc.
8 RGB1 input terminal
Connect this terminal to the monitor (DVI-D) output terminal of your PC.
9 RGB2 input terminal
Connect this terminal to the monitor (mD-sub) output terminal of your PC.
0 Display output terminals (Picture/Audio)
Connect these terminals to the picture input terminal and audio input terminals on the display.
A Power input terminal
Connect this terminal to the power cable supplied with the display.
E-10
VIDEO5 VIDEO6
AUDIO
INPUT
VIDEO1 VIDEO2
SCART SCART
VIDEO5 VIDEO1
COMPONENT VIDEO COMPONENT VIDEO
Y P /C P /C Y P /C P /C
B B R R B B R
RGB1
DVI
RGB1 RGB2
AUDIO
OUTPUT
DIGITAL
DIGITAL1 DIGITAL2
VIDEO4
SCART
RGB2
mD-sub
R
PICTURE AUDIO
DISPLAY OUTPUT