Advertisement
Data sheet | HP MSM Controller Series
6
• SSH
Encrypts all transmitted data for secure remote CLI access over IP networks
• SSL
Encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in
the switch
• IEEE 802.1X, Active Directory, and RADIUS network logins
Control wireless network access for authentication and accountability, using the IEEE 802.1X,
Microsoft Active Directory, and RADIUS
• RADIUS-based MAC authentication
Authenticates a wireless client with a RADIUS server, based on the MAC address of the client;
this is useful for clients with minimal or no user interface
• Web-based authentication
Provides a Web browser-based environment to authenticate clients that may not support the
IEEE 802.1X supplicant
• IEEE 802.1X supplicant on MSM APs
Helps prevent deployment of rogue networking equipment
• Secure management access
Encrypts all access methods (CLI, GUI, or MIB) securely through SSH v2c, SSL, and/or SNMPv3
Policy management
• Standards-based authentication support for Microsoft Active Directory and IEEE 802.1X
Integrates seamlessly into existing authentication services or uses the built-in database
• Integration with HP IMC Network Management software
Helps ensure consistent policy enforcement across wired and wireless networks
Connectivity
• 10GbE connections to the switch fabric (the MSM765 zl and MSM775 zl premium mobility
controllers only)
Leverages two 10GbE wire-speed internal connections to help ensure that the network
connections from the application to the switch backplane do not limit application performance
• IPv6 wireless client traffic forwarding
Is supported for L2 and L3 mobility (MTM) and for client traffic directly bridged at the APs
• IEEE 802.3ad link-aggregation control protocol (LACP) and HP port trunking
(the MSM720 controller only)
Support up to six ports bonded via LACP; and facilitates manually configured trunks between
an HP switch and the controller
Advertisement
