Activating Con@Ctivity 2.0; Installation Of The Con@Ctivity 2.0 Stick; Activating The Con@Ctivity 2.0 Function; Activating The Ventilation Hood - Miele DA 6996 W Operating And Installation Instructions

Installation of the Con@ctivity
2.0 stick
In order for you to be able to use the
Con@ctivity 2.0 function, the cooktop
must be equipped with a Con@ctivity
2.0 stick.
 See the relevant installation
instructions of the Con@ctivity 2.0
stick.
Activating the Con@ctivity 2.0
function
To use the Con@ctivity 2.0 function, the
radio link between the cooktop and the
ventilation hood must be activated.
Both appliances must be installed and
operational.
Wireless connection must be activated
on the ventilation hood and the cooktop
at the same time. Activation on the
ventilation hood is described below.
Activation on the cooktop is described
in the relevant operating and installation
instructions. Please refer to the
operating instructions before starting.
Activate the ventilation hood first, then
the cooktop.

Activating Con@ctivity 2.0

Activating the ventilation hood

 The cooktop and ventilation hood
must be turned off.
 Press and hold the delayed shutdown
button 515 for approx. 10 seconds
until the 1 indicator appears in the fan
level display.
 Then, press the following buttons in
order:
– The  button
– Followed by the  button
– And then the lighting button .
The hood is in log on / log off mode.
If the wireless connection is activated, 2
and 3 will light up at the same time.
If there is no wireless connection, 2 and
3 will flash constantly (Con@ctivity 2.0
is already activated or a remote control
is logged on).
 To activate Con@ctivity 2.0, press the
"" button.
The search for a wireless connection
will start.
 As this is happening, activate the
cooktop.
41