Changing A Halogen Lamp - Miele DA 396-6 Operating And Installation Instructions

Cleaning and care

Changing a halogen lamp

The halogen lamps get very hot
during operation.
They can cause burns even after
being switched off for some time!
Allow them to cool down for a few
minutes before changing them.
 Disconnect the cooker hood from the
mains electrical supply before
replacing the lamp.
22
 Remove the grease filters.
 Turn the nut anti-clockwise as far as
it will go. The halogen lamp will then
drop down towards you.
 Turn the halogen lamp anti-clockwise
and pull it out.
 Replace it with a new lamp of the
same type: GU/GZ 10, 230 V, 50W.
Refit the lamp by reversing the steps
shown above. Please observe
manufacturer's instructions.
 Replace the grease filters.