Miele DA 396-6 Operating And Installation Instructions page 25

a 3 protective sheets
for use when fitting the tower.
b 1 exhaust connection
for exhaust ducting  150 mm
c 1 reducing collar
for exhaust ducting  125 mm
d 1 non-return flap
for fitting into the exhaust
connection on the motor unit (not
needed for recirculation mode)
e Wall bracket
for securing the cooker hood to the
wall.
f Conversion kit for recirculation
mode
including directional unit and flexible
aluminium hose (the conversion kit
is not supplied. It is available as an
optional extra - see "Technical
data").
8 screws, 5 x 60 mm and
8 plugs, 8 x 50 mm
for securing the wall bracket.
The screws and plugs are designed
for use in solid walls only.
For other types of wall construction,
alternative fixings will be required.
Make sure the wall is able to take the
weight of the cooker hood.
2 x M 6 self-tapping nuts
for securing the canopy
2 screws 3.9 x 7.5 mm
for securing the tower
1 lever
for dismantling the tower
Installation instructions
Installation
25