The Cooktop Light - Whirlpool Desiger Style RM996PXV Use & Care Manual

Cooktop and Lower Oven Care
Continued
The cooktop light
The Top Light Switch is located below the control panel. Push the right side of the
switch to turn the light ON. Push the left side of the switch to turn it OFF.
To replace the fluorescent tube
and starter:
Electrical Shock Hazard
Make sure power to the range
has been turned OFF at the main
power supply before replacing
the fluorescent tube. Failure
to do so could result in electrical
shock.
1. Unplug appliance or disconnect at
main power supply.
2. Remove the 3 screws and metal trim
that supports the top of the light
cover. The glass is heavy. Hold it
securely.
3. With both hands, pull top of light
cover towards you and lift it out of
bottom support trim.
4. Grasp the fluorescent tube at both
ends. Roll bottom of the tube towards
the front until both ends come out of
the receptacles. Replace with a 20-
watt cool-white fluorescent tube. If
starter needs replacement, push in
and turn to remove and replace.
5. With both hands, carefully fit the
glass light cover into the bottom
metal support trim. Replace the top
support trim and screws. Plug in
appliance or reconnect at main
power supply.