Pride Jazzy 610 Owner's Manual page 26

V . C O M F O R T
12. Plug the controller connector(s) into the power base.
13. Reinstall the rear shroud and tighten the fasteners.
Swing-away Footrests
Swing-away Footrests (SFRs) enable you to rotate the foot-
rests to the side before you transfer onto or off or your power
chair. See figure 20.
To rotate the SFRs:
1. Push in the release lever.
2. Rotate the SFRs.
To adjust the SFR length:
1. Remove the two adjustment screws from the side of
each footrest extension.
2. Slide the footrest up or down to the desired length.
3. Reinstall the two adjustment screws.
Elevating Leg Rests
Elevating Leg Rests (ELRs) offer an infinite range of ad-
justment for the leg angle and a footrest adjustment range
of 12–19 in. See figure 21.
To rotate the ELRs:
1. Push in release lever A.
2. Rotate the ELRs.
To adjust the ELR angle:
1. Push down release lever B.
2. Move the leg rest to the desired angle.
To adjust the ELR length:
1. Remove the two adjustment screws from the side of
each leg rest extension.
2. Slide the leg rest up or down to the desired length.
3. Reinstall the two adjustment screws.
26
A D J U S T M E N T S
FOOTREST
EXTENSION
Figure 20. Swing-Away Footrests
LEG REST
EXTENSION
Figure 21. Elevating Leg Rests
ADJUSTMENT
BOLT
ADJUSTMENT SCREWS
Figure 22. Heavy Duty Drop-In Leg Rests
www.pridemobility.com
SFR RELEASE LEVER
ADJUSTMENT
SCREWS
RELEASE LEVER A
RELEASE LEVER B
ADJUSTMENT
SCREWS
LEG REST HANGER
LEG REST EXTENSION
Jazzy 610