Pride Jazzy 610 Owner's Manual page 24

Jazzy 610
Hide thumbs Also See for Jazzy 610:
Table of Contents

Advertisement

V .
C O M F O R T
Armrest Width Adjustment
You can change each armrest's width independently of the other.
NOTE: Changing the armrest width may increase the
overall width of your power chair.
To change the armrest width:
1. Locate the two armrest knobs on each side of the arm-
rest receiver bracket. See figure 15.
2. Loosen the knobs.
3. Slide the armrests in or out to the desired width.
4. Tighten the knobs.
Armrest Angle Adjustment
To change the armrest angle:
1. Lift the armrest straight up so that it is perpendicular to
the floor. See figure 15.
2. Loosen the jam nuts.
3. Turn the adjusting screw clockwise to raise the front of
the armrest, or turn the adjusting screw counterclock-
wise to lower the front of the armrest.
4. Tighten the jam nuts to lock the adjusting screw into
place.
Foot Platform Height Adjustment
The foot platform height is easily adjusted to different heights
in 1/2-in. increments.
To raise or lower the foot platform:
1. Remove the quick release fasteners from the foot plat-
form bracket. See figure 16.
2. Loosen the foot platform securement nut by one-half
turn.
3. Raise or lower the foot platform to the desired height.
4. Reinstall the quick release fasteners into the foot plat-
form bracket and tighten.
5. Tighten the foot platform securement nut.
Foot Platform Depth Adjustment
To adjust the foot platform depth:
1. Remove the quick release fasteners from the foot platform bracket. See figure 16.
2. Move the foot platform in or out to the desired depth.
3. Reinstall the quick release fasteners into the foot platform bracket and tighten.
Quick Release Fasteners: The foot platform is attached to the power base with two quick release fasteners. See figure
16. Each quick release fastener consists of a bolt, a lever, and a nut. See figure 17. The lever has a cam on the end that
allows it to clamp into place. The quick release fastener has two states: clamped and unclamped. When the lever is open,
24
A D J U S T M E N T S
FOOT
PLATFORM
BRACKET
Figure 16. Foot Platform Adjustment
Figure 17. Quick Release Fastener Operation
www.pridemobility.com
FOOT PLATFORM
RETAINING PIN
NUT
BOLT
UNCLAMPED
LEVER (OPEN)
QUICK RELEASE
FASTENERS
SECUREMENT
NUT
LEVER (FULLY CLOSED)
CAM
CLAMPED
Jazzy 610

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents