Disassemble Ballast Module - Optoma EP735 Service Manual

4-4 Disassemble Ballast Module

2
Ballast Wire
1. Unscrew two screws and unplug Ballast wire.
2. Unscrew two screws on Ballast, two screws on Power Cord Fix and one screw of
Ground Plate.
3. Take off Balast Module from Base Housing.
4. Unscrew one screw to remove Ground Plate from Ballast.
5. Unplug one wire and tear off Ballast Mylar.
5
Ballast
1
EzPro735
Ballast Mylar
2
Base Housing
EzPro735
4
2
Power Cord
Fix
S
M 4 - 9
ERVICE ANUAL