Table of Contents
Advertisement
4.
Key S/N into the blank space beside Bar Code, then press "Enter" key on keyboard to
begin programming.
S/N
5
After finishing the above actions, "DFP Success" will appear on the screen.
successful signal
6.
Power on EP735, then input digital signal. If there is no display, it means EDID is not
keyed in sucessfully. Please repeat the step 1~5 again.
(Note : Can't run two EDID programs at the same time.)
EzPro735
EzPro735
S
M
ERVICE
ANUAL
10 - 5
Advertisement
Table of Contents
