User Programs - Sharp AR-5420 Operation Manual

2
Press and hold down the exposure mode
selector key for approximately 5 seconds.
The MANUAL (
and the PHOTO (
to blink. The light and dark indicator
marked "5" will light up, indicating the
standard toner mode is active.
3
To enter the toner save mode, press the
light (
indicator marked "1" will light up,
indicating the toner save mode is
selected.
4
4
Press the exposure mode selector key. The PHOTO (
indicator will stop blinking and will light up steadily. The light
and dark indicator marked "3" will light up. The toner save
mode is now active.
To return to the standard mode, repeat the procedure but use the dark
(

USER PROGRAMS

The user programs allow the parameters of certain functions to be set, changed, or
cancelled as desired.
Setting the user programs
1
Press and hold down the light (
seconds until all the alarm indicators (
and "
2
Use the left copy quantity (
number. The selected number will blink in the left side of the
display.
3
Press the start (
steadily lit and the currently selected parameter number for the
program will blink on the right side of the display.
4
Select the desired parameter using the right copy quantity (
key. The entered parameter number will blink on the right of the
display.
5
20
) indicator will go out
) indicator will begin
) key. The light and dark
) key to select exposure level "5" in step 3.
" appears in the display.
) key. The entered program number will be
) key for more than 5
, ,
) key to select a user program
)
, ) blink
)