About Supplies - Sharp AR-5420 Operation Manual

Unit dimensions
Operating conditions
Noise level
OptEmission concentration
(measurement according to
RAL-UZ 62)
1
* Feed paper lengthwise only.
2
* Leading and trailing edges.
3
* Along the other edges in totals.
4
* Not includes toner and drum cartridges.
As a part of our policy of continuous improvement, SHARP reserves the
right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from
these values in individual units.

ABOUT SUPPLIES

When ordering supplies, please use the correct part numbers as listed below.
Be sure to use only genuine SHARP parts and supplies.
Supply list
Supply
Toner cartridge
*Based on copying onto A4-type paper at 6% toned area.
34
Model
Width
Depth
Height
For best copying results, be sure to use only SHARP Genuine
Supplies which are designed, engineered, and tested to maximize the
life and performance of SHARP copiers. Look for the Genuine
Supplies label on the toner package.
Part number
AR-208T
518mm
462.5mm
295.6mm
Temperature: 10°C to 30°C
Humidity: 20% to 85%
Sound Power Level L
wA
Copying: 6.4 [B]
Standby: 3.3 [B]
Sound Pressure Level L
Copying: 48 [dB (A)]
Standby: 17 [dB (A)]
Sound Pressure Level L
Copying: 52 [dB (A)]
Standby: 17 [dB (A)]
Noise emission measurement in accordance with ISO 7779.
Ozone: less than 0.02 mg/m
Dust: less than 0.075 mg/m
Styrene: less than 0.07 mg/m
Usable life
Approx. 8,000 sheets*
AR-5420
(1B=10dB)
(bystander positions)
pA
(operator position)
pA
3
3
3