Seagate Ultra160 Product Manual page 312

294
Table 225: Error codes for ASC and ASCQ bytes (Table 219 bytes 12 and 13 of Sense Data) (continued)
ASC ASCQ
(byte 12) (byte 13) Description
26 97 Invalid Field Parameter—TMS Firmware Tag
26 98 Invalid Field Parameter—Check Sum
26 99 Invalid Field Parameter—Firmware Tag
27 00 Write Protected
29 00 Power On, Reset, Or Bus Device Reset Occurred
29 01 Power-On Reset Occurred
29 02 SCSI Bus Reset Occurred
29 03 Bus Device Reset Function Occurred
29 04 Device Internal Reset Occurred
29 05 Transceiver Mode Changed To Single-Ended
29 06 Transceiver Mode Changed To LVD
2A 01 Mode Parameters Changed
2A 02 Log Parameters Changed
2A 03 Reservations preempted
2A 04 Reservations Released
2A 05 Registrations Preempted
2C 00 Command Sequence Error
2F 00 Tagged Commands Cleared By Another Initiator
31 00 Medium Format Corrupted
31 01 Format Failed
31 91 Format Corrupted, World Wide Name (WWN) Is Invalid
32 00 No Defect Spare Location Available
32 01 Defect List Update Error
32 02 No Spares Available—Too Many Defects On One Track
35 00 Unspecified Enclosure Services Failure
35 01 Unsupported Enclosure Function
35 02 Enclosure Services Unavailable
35 03 Enclosure Transfer Failure
35 04 Enclosure Transfer Refused
37 00 Parameter Rounded
3D 00 Invalid Bits In Identify Message
3E 00 Logical Unit Has Not Self Configured Yet
3F 00 Target Operating Conditions Have Changed
3F 01 Microcode Changed
3F 02 Changed Operating Definition
3F 05 Device Identifier Changed
3F 90 Invalid APM Parameters
3F 91 World Wide Name (WWN) Mismatch
40 01 DRAM Parity Error
40 02 DRAM Parity Error
SCSI Interface Product Manual, Rev. B