Seagate Ultra160 Product Manual page 311

SCSI Interface Product Manual, Rev. B
Table 225: Error codes for ASC and ASCQ bytes (Table 219 bytes 12 and 13 of Sense Data) (continued)
ASC ASCQ
(byte 12) (byte 13) Description
14 01 Record Not Found
15 00 Random Positioning Error
15 01 Mechanical Positioning Error
15 02 Positioning Error Detected By Read Of Medium
16 00 Data Synchronization Mark Error
17 00 Recovered Data With No Error Correction Applied
17 01 Recovered Data Using Retries
17 02 Recovered Data Using Positive Offset
17 03 Recovered Data Using Negative Offset
17 05 Recovered Data Using Previous Logical Block ID
17 06 Recovered Data Without ECC—Data Auto Reallocated
18 00 Recovered Data With ECC
18 01 Recovered Data With ECC And Retries Applied
18 02 Recovered Data With ECC And/Or Retries, Data Auto-Reallocated
18 05 Recovered Data—Recommand Reassignment
18 06 Recovered Data Using ECC and Offsets
18 07 Recovered Data With ECC—Data Rewritten
19 00 Defect List Error
19 01 Defect List Not Available
19 02 Defect List Error In Primary List
19 03 Defect List Error in Grown List
19 0E Fewer than 50% Defect List Copies
1A 00 PARAMETER LIST LENGTH Error
1B 00 Synchronous Data Transfer Error
1C 00 Defect List Not Found
1C 01 Primary Defect List Not Found
1C 02 Grown Defect List Not Found
1C 83 Seagate Unique Diagnostic Code
1D 00 Miscompare During Verify Operation
1F 00 Number of Defects Overflows the Allocated Space That The Read Defect Command Can
Handle
20 00 Invalid Command Operation Code
21 00 LOGICAL BLOCK ADDRESS Out Of Range
24 00 Invalid Field In CDB
25 00 Logical Unit Not Supported
26 00 Invalid Field In Parameter List
26 01 Parameter Not Supported
26 02 Parameter Value Invalid
26 03 Invalid Field Parameter—Threshold Parameter
26 04 Invalid Release of Active Persistent Reserve
293