Table of Contents
Advertisement
278
[6]
The REGENERATE LENGTH field indicates the length in logical blocks of the resulting Xor data. It also
specifies the length in logical blocks that is transferred from each of the specified sources.
[7]
The parameter data for the REGENERATE command is defined in Table 202. This parameter data
describes the other devices that will be sources for the regenerate operation. The target receiving the
REGENERATE command is implicitly a source and is not included in the parameter data.
[8]
See Table 61, "CONTROL field," in Section 7.2.1.
SCSI Interface Product Manual, Rev. B
Advertisement
Table of Contents
