Table of Contents
Advertisement
232
Table 164:
Report transfer capabilities subpage
Bit
7
Byte
0
1
2
3
4
5
6
7
[1]
The MINIMUM TRANSFER PERIOD FACTOR field shall be set to the smallest value of the transfer period
factor supported by the SCSI target port.
[2]
The MAXIMUM REQ/ACK OFFSET shall be set to the largest value of the REQ/ACK offset supported by
the SCSI target port.
[3]
The MAXIMUM TRANSFER WIDTH EXPONENT field shall be set to the largest value of the transfer
width exponent supported by the SCSI target port.
[4]
The SCSI target port shall set the bits in the PROTOCOL OPTIONS BITS SUPPORTED field to indicate
the protocol options supported by the SCSI target port.
6
5
MINIMUM TRANSFER PERIOD FACTOR [1]
MAXIMUM REQ/ACK OFFEST [2]
MAXIMUM TRANSFER WIDTH EXPONENT [3]
PROTOCOL OPTIONS BITS SUPPORTED [4]
SCSI Interface Product Manual, Rev. B
4
3
Reserved
Reserved
Reserved
Reserved
2
1
0
Advertisement
Table of Contents
