Medalist 1080Sl Scsi Product Manual, August 1995; Seek Command (0B H ); Inquiry Command (12 H ) - Seagate MEDALIST 1080SL Product Manual

Medalist 1080sl SCSI Product Manual, August 1995

3.4.8 Seek command (0B
When the drive receives the Seek command, it seeks to the track of the
specified logical block address. This command is seldom used because
all commands that access the disc contain implied seeks. In systems that
support disconnection, the drive disconnects when it receives a valid
Seek command.
Bytes
7 6
0 0 0
1 LUN
2
3
4 0 0
5 0 0
Bytes 1–3 The logical block address specifies the logical block to
which the head seeks.
3.4.9 Inquiry command (12
When the drive receives the Inquiry command, it sends the inquiry data
to the initiator. When the requested inquiry data cannot be returned, a
check condition status is reported.
If an Inquiry command is received from an initiator with a pending
unit-attention condition (before the drive reports a check condition
status), the drive performs the Inquiry command and the Unit Attention
condition is not cleared.
)
H
Bits
5 4 3
0 0 1
Logical block address (MSB)
Logical block address
Logical block address (LSB)
0 0 0
0 0 0
)
H
41
2 1 0
0 1 1
0 0 0
0 0 0