Firmware Numbers Page (C0 H ) - Seagate MEDALIST 1080SL Product Manual

106 Medalist 1080sl SCSI Product Manual, August 1995
Byte 5 The SAVIMP bit is always zero; therefore, the current
operating definition parameter cannot be saved. If the
SAVIMP bit is one, the current operating parameter can be
saved.
The default operating definition field contains the value of
the default operating definition. If no operating definition is
saved, the drive uses the default operating definition.
Bytes 6–8 If the SAVIMP bit is zero, the default definition parameter
cannot be saved. If the SAVIMP bit is one, the default
definition parameter can be saved.
The supported operating definition field contains the value
of the supported operating definition. If no supported oper-
ating definition is saved, the drive uses the default operating
definition.
D.2.3 Firmware Numbers page (C0
The Firmware Numbers page is shown below. The table summarizes the
function and default value of each bit.
Bytes
7 6
0 Peripheral qualifier
1
2
3
4–7
8–11
12–15
Bytes 4–7 The controller firmware number field contains the control-
ler firmware number in ASCII text.
Bytes 8–11 The boot firmware number field contains the boot firm-
ware number in ASCII text.
Bytes 12–15 The servo firmware number field contains the servo firm-
ware in ASCII text.
)
H
Bits
5 4 3 2
Peripheral device type
Page code (C0 )
H
Reserved (00 )
H
Page length (0CH)
Controller firmware number
Boot firmware number
Servo firmware number
1 0