Table of Contents
Advertisement
M
ULTI PURPOSE TRAY
1. Open the multi purpose tray and press gently down on the
paper platform (1) to ensure it is latched down.
2. Load the paper and adjust the paper guides (2) to the size of
paper being used.
>
When printing on headed paper load the paper into the
multi purpose tray with pre-printed side up and top
edge into the MFP.
>
Envelopes should be loaded face up with top edge to
the left and short edge into the MFP.
>
Do not exceed the paper capacity of about 50 sheets or
10 envelopes. Maximum stacking depth is 0.3937
inches (10 mm).
3. Press the tray latch button (3) inwards to release the paper
platform, so that the paper is lifted and gripped in place.
Note
Before closing the multi purpose tray, paper platform (1) must be
latched down.
4. Set the correct paper size for the multi purpose tray in either
the Media Menu (printer menu settings) or Print Menu
(scanner menu settings). See
details.
Note
You only need to update one menu; the scanner and printer
menus automatically synchronize to ensure the information is
consistent.
1
"Configuration" on page 31
Loading paper > 25
for
Advertisement
Table of Contents
