Electronic Timer - Cannon Coniston C50GCW Instructions For Installation And Use Manual

Electronic timer

To set
Note: This may be set while the oven is switched off or while it is switched on.
the clock
1. Press the
start to flash.
2. Use the "+" and "-" buttons to adjust the hour value.
3. Press the
4. Use the "+" and "-" buttons to adjust the minute value.
5. Press the
Note: If none of the buttons are pressed, the settings will be confirmed automatically after 10 seconds
have passed.
Manual The programmer after the Power up and the Clock time setting will be in 'Manual Mode' and shall be
Mode
possible to engage the other programmer functions using the
The oven will be driven directly by the user by means of the knobs present on the control panel.
To set the
Note: This function does not interrupt cooking and does not affect the oven; it is simply used to
activate the buzzer when the set amount of time has elapsed.
minute minder
1. Press the
start to flash.
2. Follow steps 2 to 5 "to set the clock" as detailed above.
The countdown will then be displayed; at the end of this period of time the buzzer will sound (this may
be stopped by pressing any of the buttons, or it will stop of its own accord after one minute).
Programming the
Note: A cooking mode must be selected before programming can take place.
duration of cooking
1. Press the
2. Follow steps 2 to 5 "to set the clock" as detailed above.
•
will stop automatically at 10:15 a.m.
Programming Note: A cooking duration must be selected before delayed programming can take place.
1. Follow istruction "programming the duration cooking" as detailed above.
delayed cooking
2. Then press the
3. Follow steps 2 to 5 "to set the clock" as detailed above.
•
time is set to 12:30. The programme will start automatically at 11:15 a.m.
Programming has been set when the
cooking end time and the cooking duration alternately.
To cancel a Press button "-" up until 0 • 00.
previous setting
18
Cooking
time setting
Count down
time setting
button several times until the
button again so that the other two numerical digits on the display begin to flash.
button again to confirm.
button several times until the
button several times until the
For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is programmed. The programme
button until the
For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is programmed and the end
End cooking
time setting
Clock
time setting
Selector
button
icon and the first two numerical digits on the display
selector.
icon and the first two numerical digits on the display
icon and the first digit on the display flash.
icon and the two digits on the display flash.
and icons are illuminated. The TIME display shows the