Stage 2: Configuring Sources - Meridian G01 Installation Manual

Stage 2: Configuring sources

The control unit or receiver provides up to 12 sources
corresponding to the 12 source keys on the MSR+:
CD, RADIO, DVD, AUX, DISC, TAPE, TV, CABLE, SAT, VCR1, VCR2,
GAME.
For each source the Configure sources stage allows you to
configure:
• Whether it is in use.
• The label used for it on the front-panel display, of up to five
characters.
• The audio input it selects.
• The TRIGGER output level it selects.
• The Comms type and address, to identify other Meridian
equipment.
The procedure for doing this is as follows.
To configure a source
Either:
• Press Next after resetting the product; see page 18.
Or:
• Press Wizard; see page 17.
• Press Skip to skip past the Reset settings menu.
The display shows the title screen for stage 2:
Press More for Help
2: Configure sources
Back Next
• Press Next to proceed or Skip to go to stage 3.
The display shows the first source and the first configuration option
for that source: whether it is in use:
This source is:
Radio
Source Back Next
• Press Next or Back to step between options.
A description of each option is shown on the top line of the
display, and its current value is shown to the right of the source
name.
When changing the source name, Next and Back step between
character positions.
The options are summarised in the table on the next page.
To change an option
• Press A or V to step through the alternative values for the
option.
C o n f i g u r i n g t h e
c o n t r o l u n i t o r
Skip
in use
óòô öõú
1 9
r e c e i v e r