Stage 1: Resetting The Product - Meridian G01 Installation Manual

1 8
C o n f i g u r i n g t h e
c o n t r o l u n i t o r

Stage 1: Resetting the product

r e c e i v e r
The control unit or receiver provides several alternative standard
settings, called Types, which configure all aspects of the product
into the most commonly needed configurations.
Choosing one of the Types overrides any other configuration you
may have performed, and so can be used to reset the configuration
of the unit.
To reset the configuration
• Press Wizard.
The display shows the title screen for stage 1:
• Press Next to proceed or Skip to go stage 2.
If you pressed Next the display shows:
• Press Yes to proceed or Back to exit.
Press More for Help
1: Reset settings
Back Next Skip
Reset all settings?
Back Yes
The display shows the current Type:
Main System
Back Next
• Press A or V to step through the available Types.
A description of each type is shown on the top line of the display.
As you select each Type the control unit or receiver is reset to that
Type.
When you have selected the Type you want:
Either:
• Press Next to proceed to configuring sources, as described in the
next section.
Or:
• Press On/Off to return to standby.
Types
The following table lists the available types:
Type Description
Type 1 Main system.
Type 2 Second zone system.
Type 1
óòô öõú