Installing the control unit or receiver
This chapter explains how to install the control unit or receiver. It describes what you should
find when you unpack the product, and how you should connect it to the other equipment in
You should not make any connections to the product or to any other component in the system
while the AC power supply is connected and switched on.
Unpacking
The G01 Control Unit, G02 Balanced Control Unit, and G51
Receiver are supplied with the following accessories:
• MSR+ remote control with batteries, manual, and spare key caps.
• Meridian Comms lead.
• Pre-Power jumpers preinstalled (G51 only).
• Power cord.
• This manual.
• Meridian G Series System Guide .
Models fitted with an AM/FM tuner also include the following:
• AM antenna (G01 and G51).
• FM antenna (G01 and G51).
• 2 FM antenna (Belling-Lee) adaptors (G01 and G51).
the system.
Models fitted with a DAB/FM tuner also include the following:
• Telescopic DAB antenna.
If any of these items are missing please contact your dealer.
Note: You should retain the packaging in case you need to
transport the unit.
5
I n s t a l l i n g t h e
c o n t r o l u n i t o r
r e c e i v e r