Advertisement
Amplifi er assembly replacement continued:
4
Once the two cover plates are removed,
two more screws need to be taken out in
order to separate the amplifi er assembly
from the cabinet. Keep the two screws in
a safe place.
1
2
1
5
The amplifi er assembly is now ready to
be separated from the cabinet. Do not
completely take the amplifi er assembly
off yet, as seven cables need to be
removed fi rst (as shown above):
(1) led PCB cable, (2) solid yellow,
(3) solid black, (4) blue and black,
(5) solid blue, (6) green and black, and
(7) solid green. Do not force cable
removal or connection, although
needle-nose pliers may aid in loosening
the crimped cables.
Caution:
The amplifi er assembly is
approximately 23 pounds, so please
make sure to grasp it fi rmly.
19
2
3 4
5
6
7
Advertisement
