Advertisement
Bottom woofer replacement continued:
-
Push down
5
The positive (solid yellow) and negative
(solid black) cables are still attached to
the woofer terminals. Remove the cables
from their terminals simply by pushing
down on the terminal and pulling out the
cable.
6
The picture on the right shows what
the SA1532z looks like with the grill and
bottom woofer removed . Place the
new woofer (part #0013917) where the
old one was. Follow the same steps as
above, but backwards 5 to 1, making
sure to keep the led PCB assembly cable
in front of the woofer. Power up the
SA1532z and the new woofer should now
be pumping out glorious lows. Awesome,
you just replaced a 15" woofer!
+
6
Advertisement
