Advertisement
High Frequency Driver replacement continued:
9
Keep the four screws and locking
washers in a safe place.
10
The high frequency driver should easily
lift right off of the horn assembly. Holding
down the horn assembly with one hand
while lifting up on the driver with the
other hand may help.
1
4
3
11
Turning the high frequency driver over
reveals the cover plate which needs
to be removed using the phillips head
screwdriver. Keep the four screws in a
safe place. Replace with the new driver
(part #0013925) and follow the same
steps as above, but backwards 11 to
1. Power up the SA1532z and the new
driver should now be pumping out those
highs again. Fantastic, you just replaced
a high frequency driver!
13
2
Advertisement
