Table of Contents
Advertisement
MBE Mounts and Adapters
6.
7.
5.2
Attaching a REG-D1/L1 to an MBE-28
The REG-D1 and REG-L1 License Plate Capture Cameras are
designed and configured to capture images of license plates
under a wide range of ambient light and weather conditions.
Refer to the REG-D1 Installation Instructions or to the REG-L1
Installation Instructions, both located on the Bosch Security
System Web site, for complete camera details.
NOTICE!
Select a suitable location that protects the camera from
accidental damage, tampering, and environmental conditions
that exceed the camera's specifications.
CAUTION!
The selected mounting location should not place the camera in
a situation where its environmental specifications could be
exceeded.
Ensure the selected location is protected from falling objects,
accidental contact with moving objects, and unintentional
interference from personnel. Follow all applicable building
codes.
Bosch Security Systems, Inc.
Route the applicable wires to the EX27 camera. Remove
any of the hole plugs (item 4) to facilitate cable
management.
Refer to the EX27/EX27N/EX27D Installation Manual to
configure and to use the camera.
Installation Guide
Attaching Cameras to the Brackets | en
17
| 3.0 | 2011.10
Advertisement
Table of Contents
