Table of Contents
Advertisement
16
en | Attaching Cameras to the Brackets
Use the following illustration to identify the parts of the MBE-27
bracket:
Figure 5.1 MBE-27 Bracket with MBE-17 Wall-Mount Adapter
1 MBE-27 Bracket
2 Interface Plate
Use the following procedure to mount an EX27 camera:
1.
2.
3.
4.
5.
| 3.0 | 2011.10
Attach the MBE-27 Bracket to a wall or a pipe according to
the instructions in Section 3 MBE-27/28 Wall Mount
Applications, page 8, or Section 4 MBE-27/28 Pole Mount
Applications, page 12.
Position the interface plate (item 2 in Figure 5.1) on the
bracket.
Place the pan/tilt mounting bracket connected to the EX27
camera onto the interface plate (item 2) on the MBE-27.
Feed the M8 x 45 mm bolt through the bracket (item 1)
and the interface plate (item 2) and into the pan/tilt
mounting bracket.
Use the #6 hex key to tighten the M8 x 45 mm bolt (Item 3)
and to secure the EX27 camera to the MBE-27 bracket.
Installation Guide
MBE Mounts and Adapters
3 M8 x 45 mm bolt
4 Hole Plugs
Bosch Security Systems, Inc.
Advertisement
Table of Contents
