Windows Xp - Tascam iU2 Owner's Manual

4 – Application Guide
MON MIX
knob

Windows XP

1 Shut down all applications, and open the Control Panel
from the Start menu.
2 Open the Sounds and Audio Devices panel.
NOTE
If you do not see the above panel, click Sounds, Speech, and
Audio Devices and then select the Sounds and Audio Devices
panel.
3 Click the Audio tab, and set the Default device under both
Sound playback and Sound recording to iU2.
20
TASCAM iU2
4 To adjust the input level, use the INPUT L and INPUT R
knobs on the top panel of this unit. Adjust them so that
the overload indicators (L and R) do not light.
5 To adjust the output level, use the LINE OUT and
PHONES knobs on the top panel of this unit.
These settings adjust the level output from the analog
line output (LINE OUT L and LINE OUT R) connectors
and headphone output ( ) jack.
Overload indicators