Application Guide; Windows 7/Windows Vista - Tascam iU2 Owner's Manual

4 – Application Guide
This unit uses standard operating system drivers, so the
necessary settings are the same for all audio applications,
including Windows Media Player and iTunes.
CAUTION
Before connecting headphones or speakers to this unit,
minimize the volume using the LINE OUT and PHONES knobs.
Sudden loud noises could damage hearing or cause other
harm.
NOTE
• If you set the unit as the input/output source for the
computer while an application is running, that software
might not recognize the device. In this case, restart the
application software.
• If no sound can be heard even though you have made the
settings and are operating the unit correctly, try restarting
the computer.
• When you connect the unit to a computer, sound is output
via the device, but sound stops being output from the
computer's speakers and headphones jack.

Windows 7/Windows Vista

1 Shut down all applications, and open the Control Panel
from the Start menu.
2 Open the Sound panel.
16
TASCAM iU2
NOTE
If you do not see the above panel, click Hardware and Sound
and then select the Sound panel.
3 Click the Playback tab, click Speakers iU2, and then click
Set Default. The green checkmark is moved to Speakers
iU2.