Table of Contents
Advertisement
Quick Links
High Resolution Digital Audio Interface Unit
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert
the user to the presence of uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the pres-
ence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
This appliance has a serial number
located on the rear panel. Please record
the model number and serial number
and retain them for your records.
Model number
Serial number
OWNER'S MANUAL
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
D00556700A
Advertisement
Table of Contents
Related Manuals for Tascam IF-AE8HR
Summary of Contents for Tascam IF-AE8HR
- Page 1 High Resolution Digital Audio Interface Unit The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the pres- ence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
-
Page 2: Important Safety Precautions
When replacing the fuse only a correctly rated approved type should be used and be sure to re-fit the fuse cover. IF IN DOUBT — CONSULT A COMPETENT ELECTRICIAN. TASCAM IF-AE8HR For U.S.A TO THE USER This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. -
Page 3: Important Safety Instructions
24) Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. TASCAM IF-AE8HR ANTENNA LEAD IN WIRE... -
Page 4: Front Panel
Consumer and professional formats received at the XLR-type inputs are automatically distinguished by the unit. 1.1 Mounting, etc. The IF-AE8HR is a 1U unit, designed to fit into a standard 19-inch rack. Included in the package are; • The unit itself •... - Page 5 4 SAMPLING FREQUENCY switch and indicators This switch allows you to select the sampling fre- quency at which the IF-AE8HR outputs data, either to the XLR-type connectors, or to the TDIF-1 con- nector: 44.1k 88.2k...
-
Page 6: Word Sync - In
If the use of cables other than TASCAM cables causes or results in damage, the warranty is voided. 9 WORD SYNC – IN The BNC connector accepts a word clock signal from an external source. -
Page 7: Specifications
(RECEIVER) Fs/AES 512Fs Fs/2 x 512 Fs/2 WORD IN THRU (STD FS) (HI FS) TASCAM IF-AE8HR may or may not . However, they are always DIGITAL I/O ( TDIF-1 ) Keys and indicators LOCK CLOCK SOURCE WORD IN TDIF-1 AES(1-2,3-4,5-6,7-8) SAMPLING FREQUENCY 44.1k... -
Page 8: Dimensional Drawing
TASCAM IF-AE8HR Level TTL level (75 ) WORD SYNC OUT (STD Fs) Connector Level TTL level (75 ) (44.1 kHz, 48 kHz) WORD SYNC OUT (HI Fs) 75 , outputs high-frequency clock Connector Level TTL level (75 ) (88.2 kHz, 96 kHz)