Table of Contents
Advertisement
INSTALLATION
Removing Appliance From Pallet
1. After removing the packaging from the stove, lift the hopper lid, and
remove all prepackaged items that were shipped in the hopper. Next,
open the stove door and remove all prepackaged items.
2. Using a 7/16" socket or wrench, remove the two lag bolts on either
side of the stove and remove brackets by sliding them towards the
center of the unit.
Figure 10 - Removing Stove From Pallet
Installation of Leg Leveling Bolts
An optional leg leveling kit is available. In manufactured home instal-
lations a leg bolt down kit is also required (provided with stove). Install
the leveling legs per the instructions provided in kit. See Figure 11 and
Page 41 for leveling leg kit ordering information.
G
G.
Manufactured home installations will
also require a bolt down kit which
includes 2 tie down brackets (provided
with stove)
Figure 11 - Leveling Legs
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE
H7638 Leveling Leg Kit (4 per pkg.)
Leveling Legs
-
I
I
(ref. Form # 506033-21)
Leveling Legs
9
Hide quick links:
Advertisement
Table of Contents
