Parts And Their Functions; External View; Printer - Sharp XE-A137 Instruction Manual

PARTS AND THEIR FUNCTIONS

1

External View

Option battery shutter
(for the XE-A1BT)
(Only for the XE-A147)
Mode switch
Display
Printer cover
Keyboard
Drawer
Cheque slot
2

Printer

Sensor
Roller
Print roller arm
4
Drawer lock
The printer is a receipt (one station) type thermal printer, and therefore it does
not require any type of ink ribbon or cartridge. The average life of the printer is
approximately 5 million lines.
When removing the printer cover, lift up its rear.
When installing the printer cover, hook it on the pawls on the cabinet and shut it.
Caution: The paper cutter is mounted on the printer cover. Be careful not
to cut yourself.
Printer head
NOTE
Do not attempt to remove the paper with the print roller arm in the hold
position. This may result in damage to the printer and printer head.
Plug the AC adapter connector into the AC
adapter jack, then plug the AC adapter into
the wall outlet.
AC adapter
AC adapter connector
AC adapter jack
(Only for the XE-A147)
SD card slot
(Important: For SD type card
SDHC 4GB to 32GB)
Reset switch (Only for the XE-A147)
DO NOT push the reset switch unless
instructed to do.
Doing so may damage or delete the data.
RS-232 connector